Store

Long Range Legacy Transmitter
Part #01217

$2,630.00

The Long Range Legacy Transmitter is designed for simple wireless switching. With 6 digital inputs and paired with a Long Range Legacy Receiver the system performs up to 5 miles, it is the simple solution for applications where faulty wire replacement or new installation is not possible or practical.

Includes:

  • Long Range Legacy Transmitter, Part # 01217 6 Input Radio Transmitter
  • 15 Watt Power Supply (100-240 VAC Input, 12 VDC Output)
  • NEMA 4x Plastic Enclosure
  • 42″ Legacy Performance Antenna
  • Right Angle Antenna Mount
  • 25′ Coax Cable w/ BNC connectors
Share:
Description

Description

The Long Range Transmitter is an integral part of the Long Range Legacy Systems. With a range of up to 5 miles*, the Long Range Legacy System is designed for simple wireless switching. The Legacy Stationary Systems are the simple solution for applications where faulty wire replacement or new installation is not possible or practical.

Applications Include:

  • Wireless Pump Control
  • Valve Actuation
  • PLC Activation
  • Wireless Automation
  • Control Panels
  • Tactile Landing Lights
  • Security and Alarms
  • Lighting Systems
  • Conveyor Control

Operation:

Operation is simple, just connect a switch, relay, or any device with a dry contact closure to the Long Range Transmitter inputs (terminal block). When contact is closed, the transmitter will immediately send an “ON” Transmission. This will change the state of the selected receiver output from 0 to 12VDC @ 1amp. The receiver output can be used to activate a relay, solenoid, or light. Immediately after a contact is opened, the transmitter will send an “OFF” transmission to the receiver, changing the selected output from 12 to 0VDC and turning off the connected device.

Includes:

  • Long Range Legacy Transmitter, Part # 01217 6 Input Radio Transmitter
  • 15 Watt Power Supply (100-240 VAC Input, 12 VDC Output)
  • NEMA 4x Plastic Enclosure
  • 42″ Legacy Performance Antenna
  • Right Angle Antenna Mount
  • 25′ Coax Cable w/ BNC connectors
  • 1-Year Warranty

Short Medium Long Range Spec Sheet v2.2

Medium and Long Range Install Guide

Wireless Tank Level Automation:

Major cities, municipalities, and water districts commonly use the Legacy Switch Systems to control water tank levels. Simply connect the transmitter to a float or pressure switch on a water tank, allowing the receiver, connected to a pump to maintain a predetermined water level. When the water level lowers to a specified level the transmitter sends an “ON” transmission to the receiver, turning the pump on. When the predetermined level has been reached, the transmitter sends an “OFF” transmission, shutting the pump off. With a range of up to 5 miles* and ease of installation, the Long Range Legacy System is the go-to for simple wireless switching.

*The Range of all Radio products is dependent on local conditions and antenna selection/location.

 

You may also like…