The RCT Medium Range Wireless Switch System provides dependable wireless control for applications where equipment is separated by greater distances. With communication ranges up to approximately 2 miles, the system is well suited for pumps, tanks, motors, alarms, and other remotely located equipment.

Operating at 27 MHz, the system is designed for non-line-of-sight applications where terrain, buildings, or other obstructions may make wireless communication more challenging. RCT Medium Range systems eliminate the need to install long runs of control wire between locations.

The RCT Long Range Wireless Switch System provides dependable wireless control for applications where equipment is separated by greater distances. Designed for industrial, municipal, agricultural, and water-system applications, the system can control pumps, tanks, motors, alarms, and other remotely located equipment.

RCT Long Range systems are well suited for challenging sites where terrain, buildings, or long distances make installing control wire difficult or costly. Multiple configurations and communication options are available to meet the requirements of more complex remote control applications.

Medium & Long Range Wireless Control FAQs

How far can RCT Medium and Long Range systems communicate?

RCT Medium Range systems can provide wireless communication up to approximately 2 miles. Long Range systems are designed for applications requiring greater distances. Actual range depends on the system selected, terrain, obstructions, antenna placement, and other site conditions.

Do Medium and Long Range systems require line of sight?

No. RCT Medium and Long Range systems can operate in non-line-of-sight applications. However, terrain, buildings, trees, and other obstructions can affect wireless performance and range. Proper system selection and antenna placement are especially important for longer-distance installations.

What types of equipment can these systems control?

RCT Medium and Long Range systems can be used with pumps, motors, valves, tanks, alarms, and many other types of remotely located equipment. The receiver typically interfaces with the appropriate equipment control circuit.

Where should the antennas be installed?

For best performance, antennas should be mounted outdoors and as high as practical, with consideration given to terrain and obstructions between locations. RCT can help determine appropriate antenna placement for challenging applications.

Can these systems replace long runs of underground control wire?

Yes. This is a common application for RCT wireless systems. Wireless control can eliminate the need to trench and install long runs of control wire between remotely located equipment or provide an alternative when existing underground control wire has failed.

What if I’m not sure whether Medium or Long Range is right for my application?

Contact RCT with the equipment being controlled, approximate distance between locations, terrain, and any known obstructions. We can help determine which system and antenna configuration are appropriate for the application.