Legacy Stationary Systems - Remote Control Technology

Long Range Legacy Receiver Part #01216

Cindy Gladner — Mon, 02 Nov 2020 22:39:51 +0000

The Long Range Legacy Receiver is designed for simple wireless switching. Paired with a Long Range Legacy Transmitter, the system performs up to 5 miles and has 6 Inputs/Outputs. The Long Range Legacy System is a simple solution for applications where faulty wire replacement or new installation is not possible or practical.

Possible Applications:

Pump Control
Valve Actuation
PLC Activation
Wireless Automation

Operation:

Simply connect a switch, relay, or any other device with a dry contact closure to the Long Range Legacy Transmitter inputs (terminal block). When the contact is closed, the transmitter will promptly broadcast an “ON” transmission to the receiver, changing the state of the selected receiver output from 0VDC to 12VDC @1 amp. The Long Range Legacy Receiver outputs can be used to activate a relay, solenoid, or light. Immediately after the contact is open the transmitter will broadcast an “OFF” transmission to the receiver, changing the selected receiver output from 12VDC to 0VDC, and turning off the connected device.

Systems come complete with power supplies and antennas. Simply make your connections, and the Long Range Legacy System is ready to use and guaranteed to perform.

Medium and Long Range Install Guide

The post Long Range Legacy Receiver
Part #01216 first appeared on Remote Control Technology.

The post Long Range Legacy Receiver
Part #01216 appeared first on Remote Control Technology.

Medium Range Legacy Receiver Part #01241

Cindy Gladner — Mon, 02 Nov 2020 22:39:42 +0000

Includes:

2 Output Receiver
15 Watt Power Supply (110-240 VAC Input, 12 VDC Output)
NEMA 4x Plastic Enclosure
42″ Legacy Performance Antenna
Right Angle Antenna Mount
25′ Coax Cable w/ BNC connectors
2 Class C Relays Rated 6A @ 250VAC or 30VDC

Medium and Long Range Install Guide

Short Medium Long Range Legacy Spec Sheet v2.1

The post Medium Range Legacy Receiver
Part #01241 first appeared on Remote Control Technology.

The post Medium Range Legacy Receiver
Part #01241 appeared first on Remote Control Technology.

Medium Range Legacy Transmitter Part #01242

Cindy Gladner — Tue, 27 Oct 2020 17:15:15 +0000

The Medium Range Legacy Transmitter is the sending unit of the Medium Range System. The Legacy Transmitter comes equipped with 15 15-watt power Supply, NEMA 4x enclosure, 42″ high gain antenna, Right Angle Mount with Lightning arrestors, and 25′ coax cable. With a range of up to 2 miles, it is the ideal solution for long-range switching in industrial applications. The Medium Range Legacy Transmitter has a 1-year warranty. When power is not available at the location add a 20-Watt Solar Kit.

Includes:

2 Input Transmitter
15 Watt Power Supply (110-240 VAC Input, 12 VDC Output)
NEMA 4x Plastic Enclosure
42″ Legacy Performance Antenna
Right Angle Antenna Mount
25′ Coax Cable w/ BNC connectors

Short Medium Long Range Spec Sheet v2.2

Medium and Long Range Install Guide

10 and 20 Watt Solar Kits

Operation:

Operation is simple: connect a switch, relay, or any device with a dry contact closure to the transmitter inputs. When a contact is closed, the transmitter will immediately send an “ON” transmission to the receiver, changing the state of the selected receiver output from 0 VDC to 12 VDC @1 amp. The receiver output can be used to activate a relay, solenoid, light or any dry contact. Immediately after a contact is open the transmitter will send an “OFF” transmission to the receiver, changing the state of the selected output from 12 VDC to 0 VDC and turning off the connected device.

Applications:

Tank Level Control via dry contact
Tactical Landing Lights
Motion Detection
Smart Relay/PLC Control
Control Panel Control
Conveyor Control
Manual Switches
Weather Warning
Race Track Warning Lights
Dust Suppression
Strobe Light/Alarm Siren Control

The post Medium Range Legacy Transmitter
Part #01242 first appeared on Remote Control Technology.

The post Medium Range Legacy Transmitter
Part #01242 appeared first on Remote Control Technology.

Long Range Legacy Transmitter Part #01217

Cindy Gladner — Mon, 26 Oct 2020 22:25:45 +0000

The Long Range Transmitter is an integral part of the Long Range Legacy Systems. With a range of up to 5 miles*, the Long Range Legacy System is designed for simple wireless switching. The Legacy Stationary Systems are the simple solution for applications where faulty wire replacement or new installation is not possible or practical.

Applications Include:

Wireless Pump Control
Valve Actuation
PLC Activation
Wireless Automation
Control Panels
Tactile Landing Lights
Security and Alarms
Lighting Systems
Conveyor Control

Operation:

Operation is simple, just connect a switch, relay, or any device with a dry contact closure to the Long Range Transmitter inputs (terminal block). When contact is closed, the transmitter will immediately send an “ON” Transmission. This will change the state of the selected receiver output from 0 to 12VDC @ 1amp. The receiver output can be used to activate a relay, solenoid, or light. Immediately after a contact is opened, the transmitter will send an “OFF” transmission to the receiver, changing the selected output from 12 to 0VDC and turning off the connected device.

Includes:

Long Range Legacy Transmitter, Part # 01217 6 Input Radio Transmitter
15 Watt Power Supply (100-240 VAC Input, 12 VDC Output)
NEMA 4x Plastic Enclosure
42″ Legacy Performance Antenna
Right Angle Antenna Mount
25′ Coax Cable w/ BNC connectors
1-Year Warranty

Short Medium Long Range Spec Sheet v2.2

Medium and Long Range Install Guide

Wireless Tank Level Automation:

Major cities, municipalities, and water districts commonly use the Legacy Switch Systems to control water tank levels. Simply connect the transmitter to a float or pressure switch on a water tank, allowing the receiver, connected to a pump to maintain a predetermined water level. When the water level lowers to a specified level the transmitter sends an “ON” transmission to the receiver, turning the pump on. When the predetermined level has been reached, the transmitter sends an “OFF” transmission, shutting the pump off. With a range of up to 5 miles* and ease of installation, the Long Range Legacy System is the go-to for simple wireless switching.

*The Range of all Radio products is dependent on local conditions and antenna selection/location.

The post Long Range Legacy Transmitter
Part #01217 first appeared on Remote Control Technology.

The post Long Range Legacy Transmitter
Part #01217 appeared first on Remote Control Technology.

Medium Range Legacy System Part #01240

Cindy Gladner — Wed, 21 Oct 2020 20:49:22 +0000

Remote Control Technology designed and built the Medium Range Legacy System for simple wireless switching applications in mind. The Legacy System has a range of up to 2 miles and includes 2 – inputs/outputs. RCT’s Legacy Systems are the simple solution for use when faulty wire replacement or installation of a new conduit run is not possible or practical.

Applications for Medium Range Legacy System are limitless. Just about anything, that can be electrically turned on or off can be controlled remotely using Remote Control Technology’s Wireless Switching Technology. From tactical airfield lighting to automating pump operations, RCT’s goal is to provide a simple wireless solution that is easy to install and operate.

Wireless Tank Level Automation:
Valve Actuation
Conveyor Control
Grain Augers
Light Control
Stackers
PLC Activation
Engine Control
Wireless Automation

Operation

Operation is simple, connect a dry contact closure to the transmitter inputs (terminal block). When a contact is closed, the transmitter immediately sends an “ON” transmission to the receiver. The receiver changes the state of the selected receiver output from 0 VDC to 12 VDC @ 1 amp. The output on the receiver can activate a relay, solenoid, or light. Immediately after the contact changes states, the transmitter will send an “OFF” transmission to the receiver. Changing the state of the receiver’s selected output from 12 VDC to 0 VDC turning off the connected device. If the location does not have electricity turnkey, 12 VDC solar panel kits are available.

All Medium Range Legacy Systems come complete with power supplies and antennas. Make the connections, and the system is ready for use.

The range of radio products depends on local conditions and antenna selection/location.

The post Medium Range Legacy System
Part #01240 first appeared on Remote Control Technology.

The post Medium Range Legacy System
Part #01240 appeared first on Remote Control Technology.

Long Range Legacy System Part #01210

Cindy Gladner — Mon, 12 Oct 2020 17:12:46 +0000

System Includes:

Long Range Legacy Transmitter, Part # 01217 6 Input Transmitter
- 15 Watt Power Supply (100-240 VAC Input, 12 VDC Output)
- NEMA 4x Plastic Enclosure
- 42″ Legacy Performance Antenna
- Right Angle Antenna Mount
- 25′ Coax Cable w/ BNC connectors
Long Range Legacy Receiver, Part # 01216 6 Output Receiver
- 15 Watt Power Supply (100-240 VAC Input, 12 VDC Output)
- NEMA 4x Plastic Enclosure
- 42″ Legacy Performance Antenna
- Right Angle Antenna Mount
- 25′ Coax Cable w/ BNC connectors
- 6 Class C Relays Rated 6A @ 250VAC or 30VDC

The post Long Range Legacy System
Part #01210 first appeared on Remote Control Technology.

The post Long Range Legacy System
Part #01210 appeared first on Remote Control Technology.