Wireless Automated Pump Control Application Using RF Remote Control Devices

Trenching to lay new wire, repairing old wire, or replacing stolen copper wire can be extremely expensive.
Our Wireless Switch Systems simply replace the control wire that would normally connect your float switch or pressure switch to your pump starter; eliminating the need to trench or purchase large amounts of expensive wire.

Long Range: WDC, LRWSS

Medium Range: MRWSS, MRWSS 151 DA

Short Range: SRWSS, RSS 8 1Watt

Connect a dry contact (e.g. float switch, or other mechanical switch) at your storage tank to the transmitter.
Connect a 12 VDC Relay to the 12 VDC output on the receiver and to your pump starter.
Apply 110 VAC to 240 VAC single phase power to the power supply (included with most systems).
Systems are available for Short (Under 1/2 Mile), Medium (Under 2 Miles) and Long (Over 2 Miles) Ranges.
Multi-channel systems can be used for locations with multiple pumps and / or tanks
For locations without a power source use one of our turn-key solar panel kits.
Performance Guaranteed